Sony XDPPK1000 Digital Link Sound System iPod iPhone to Car Audio Remote Control

Sony Digital Link Sound SystemProduct Condition: Factory Sealed, NewPhysical Condition: NewAdd a source, a sub, and upgrade your soundSony's XDP-PK1000 Digital Link Sound System allows you to play your iPod touch® or iPhone® through your car's factory stereo system, and gives you a tremendous upgrade in the quality of your sound at the same time. The package includes a sound module with 4-channel amp, a 12" truck-style enclosure, a 300-watt sub amp, and a cradle for your iPod.How it worksThe DSP master unit includes a built-in 4-channel amplifier for your car's speakers, along with a digital sound processor that optimizes the sound for your vehicle's specific size and shape. You tap into the speaker wiring of your factory radio or amp, and connect the wires to inputs and outputs of the DSP module. The amp delivers almost twice the power found in most factory radios, bringing new clarity and excitement to your tunes. The module also includes three sets of preamp outputs, handy for connecting outboard amplifiers.Subwoofer system includedThe package includes a truck-style enclosure with a 12" sub that's compact enough to fit comfortably in most cars, along with a 300-watt sub amp that'll make sure your bass keeps up with the rest of your new system.The cradle will dockOnce you mount the cradle, and its cable, on your dash, you can dock your iPod in a convenient position for hands-on or hands-free play. The heavy-duty suction cup holds the cradle to your dash securely, with a quick-release latch for easy removal. The cradle also contains a remote control sensor, manual volume control, seek/source buttons, and DSP status indicator lights that help oversee the system. A wireless remote lets you control everything safely, so you can keep your eyes on the road.Other usesIf you own a classic car and you don't need AM/FM reception, you should take a look at this system. You can install the hideaway module somewhere out of sight, put the sub in the trunk, and mount the cradle in a convenient spot. You'll be able to play your iPod through your car's speakers, and adjust your settings with the remote. Best of all, the original radio stays in place, so your car shows well and maintains its value. This system would also work well in buses, recreational vehicles, and many other applications where you don't need an in-dash receiver.Highlights:iPod touch/iPhone integration and subwoofer for factory sound systemspackage includes DSP (digital sounds processor) master unit, subwoofer in enclosure, subwoofer amplifier, cradle for iPhone or iPod touch, and wireless remoteXDP-MU110 DSP master unit:optimizes sound settings based on your vehicle's sizeaccounts for subwoofer location4-channel internal amplifier (17 watts RMS x 4 at 4 ohms)includes input/output and power harnessesdimensions: 8-3/8"W x 1-5/8"H x 6-1/4"DXS-PK120LC subwoofer12" single voice coil 4-ohm subpower rating: 300 watts RMSsealed enclosure dimensions: 17"W x 14-5/8"H x 10-3/4"D1 x 7-3/8"D2XM-PK100D subwoofer amplifier300 watts RMS x 1 at 4 ohmsClass D amp technologyfixed low-pass filter (120 Hz, 12 dB/oct)fixed subsonic filter (6 Hz, 12 dB/oct)8-gauge power and ground leads recommended — wiring and hardware not included with amplifierfuse rating: 30A x 2amp dimensions: 14-1/8"W x 2-1/4"h x 11"Dcradle/dock:Apple®-certified dock works with iPhone (2G/3G/3GS/4/4S) and iPod touch (1st/2nd/3rd/4th gen)suction cup support holds tight to most flat surfacesquick-release lever allows for easy removalmanual volume control, and seek and select source buttonsDSP status indicator lights and remote sensorincludes cradle cable and cord clampsapproximate dimensions: 2-5/8"W x 5-1/2"H x 4-1/4"DRM-X251 Card remote commander:volume, fade, balance, tone, sourcesubwoofer level controlAutomatic Level Optimzerwarranty: 1 yearManufacture warrantySystem OverviewDigital Link Sound System:The Sony Digital Link Sound System (XDP-PK1000) allows you to integrate select iPods or iPhones into your vehicle's existing factory audio system. You can enjoy great sound from your factory car stereo and compatible iPod/iPhone via the Digital Link Sound System, which features sound settings optimized for your vehicle by using Sony digital sound technology. A separate mono-block amplifier and 12" subwoofer enclosure adds deep bass to your vehicle's factory car stereo system. The Sony Digital Link Sound System (XDP-PK1000) consists of a hide-away DSP master unit, iPod/iPhone cradle, mono-block sub amp, and 12" subwoofer in a sealed enclosure.DSP Master Unit:The hide-away DSP master unit features a built-in 17 watts x 4 channel amplifier and also includes 6-channel 2-volt preamp outputs to enhance your car stereo sound. The DSP master unit offers internal DSP processing for improved car audio sound suited for your type of vehicle.iPod/iPhone Cradle:The iPod/iPhone cradle connects to the hide-away DSP master unit via an 8' cable. The iPod/iPhone cradle fits the iPod touch and iPhone, but the connector also supports the iPod classic and iPod nano. The iPod/iPhone cradle is fitted with a suction-cup mount that adheres to your vehicle's dashboard.Mono-Block Sub Amp:The high efficiency, Class-D design, mono-block subwoofer amplifier produces 300 watts RMS.12" Subwoofer Enclosure:A compact, sealed subwoofer enclosure uses a Sony original 12" dimpled design subwoofer for powerful bass response.DSP Master Unit45W x 4ch Amplifier:The Sony Digital Link Sound System's DSP Master Unit is equipped with a 17 watt RMS (45 peak) x 4-channel high-power amplifier to drive your car audio speakers. The built-in amplifier improves the sound of existing factory car stereo. Note:CEA2006 Output Power - 17W RMS @ 4-ohms, 20Hz-20kHz, <1% THD+N.2V/6ch Preamp Outputs:The DSP Master Unit is fitted with 2-volt Front, Rear, and Sub RCA pre-amp outputs to feed an external amplifier for even better sound. The front and rear speaker preamp outputs are balance and fade adjustable. The subwoofer preamp output is non-fading.Speaker Level Input (w/ 2ch or 4ch mode):The Sony DSP Master Unit connects to your vehicle's factory car stereo via speaker-level input. You can choose between a 2-channel or 4-channel mode based on the number of speakers you are connecting. Select "2ch" if you connect only the front car speakers to the DSP master unit or "4ch" if you connect your vehicle's front & rear speakers.Internal DSP:Internal DSP processing improves both your factory audio system playback and your iPod touch or iPhone playback. This system provides well balanced sound, which appears to come from in front of the driver's seat, optimized for the vehicle type by setting the DSP master unit. The hide-away DSP Master Unit utilizes 3 multi-position switches to adjust 12 different DSP parameters, so the sound can be customized to fit your ride.Vehicle Size:Select from one of three sizes (L/M/S) based on the air volume of your car.Subwoofer:Select "Y" (yes) or "N" (no) depending on whether you have a separate amp & subwoofer connected to the system.Subwoofer Location: Then select from one of three positions (Far/Mid/Near) based on the distance between the driver's seat and where the subwoofer is located in the vehicle.Automatic Level Optimizer:The Automatic Level Optimizer adjusts the playback volume level of your connected iPod touch/iPhone to the optimum level.Tone Control:The Sony DSP Master Unit offers Bass (100Hz) & Treble (7kHz) control that is adjustable from -7dB to +7dB.Balance/Fader:You can adjust the balance between your vehicle's left & right speakers, as well as the fade between the vehicle's front & rear speakers. The system offers a 7 step balance & fade adjustment.Amp & SubMono-Block Amplifier:The Sony mono-block amplifier features a Class-D design for greater efficiency. The amplifier is rated at 300 watts RMS x 1ch (in 4-ohms, at 20-100Hz, with <1% THD) and 600 watts Peak x 1ch. The subwoofer amplifier offers the following controls and connections.Controls:Volume Level:When you have connected the mono-block amplifier & subwoofer to the system, you can adjust the level of the subwoofer independently from the system's main volume. The subwoofer level can be adjusted from -7dB to +6dB.Low Pass Filter:The sub amp is equipped with a fixed low-pass crossover (120Hz, 12 dB/oct.)Connections:Power/Ground/Remote-Turn On:The power and ground connections are 0.5625" wide screw terminals that will accommodate up to 4-gauge wire. The remote turn-on terminal is 0.3125" wide and will accept up to 8-gauge wire. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended for the power, ground, and remote wires.Line Level Input:The mono-channel amplifier is equipped with a single pair of gold-plated RCA line level inputs.Line Level Output:The amplifier has a pair of gold-plated RCA line level outputs for feeding a full-range stereo signal to another amplifier. It is the same signal that is input through the line inputs. The amplifier's crossovers have no effect on the line level output signal.Speaker Output:The subwoofer amplifier is equipped with two pairs of gold-plated speaker terminals for an easy parallel subwoofer connection. All four speaker terminals are 0.3125" widescrew terminals and will accommodate up to 8-gauge wire. A Phillips-head or flat blade screw driver (not supplied) is required to tighten/loosen the terminals. Spade connectors are recommended for the speaker wires.Fuses:The amp is equipped with two 30 amp ATC blade fuses.12" Subwoofer Enclosure:The sealed (acoustic suspension) enclosure is loaded with a front-firing 12" polypropylene cone woofer with rubber surround and Ferrite magnet. The 12" subwoofer can handle up to 420 watts (RMS) and 1000 watts (Peak). The subwoofer enclosure features a set of 5-way, gold-plated bind-post speaker terminals. The 12" subwoofer enclosure is rated at 4-ohms at the box's speaker terminal